Sintering Archives - 51ÁÔÆæ /tech-downloads-category/sintering/ Quality Vacuum Heat Treating, Brazing, Carburizing, and Nitriding Wed, 27 Nov 2024 13:17:10 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 /uploads/2024/07/sol-favicon-298x300.png Sintering Archives - 51ÁÔÆæ /tech-downloads-category/sintering/ 32 32 Austempering at Conventional Sintering Temperatures /tech-downloads/austempering-at-conventional-sintering-temperatures/ Wed, 17 Jun 2015 16:40:21 +0000 /?post_type=pt_tech_downloads&p=5758 A paper published in 2004 described the advantages of austempering after a high temperature sintering process. One disadvantage is the increased cost involved with high temperature sinter cycles. This paper describes the tensile properties that result from sintering at a conventional sinter temperature (1120°C) and austempering according to the cycle describe in a previous paper. The properties that are obtained are compared with the properties that result from high temperature sinter and austemper cycle.

The post Austempering at Conventional Sintering Temperatures appeared first on 51ÁÔÆæ.

]]> A paper published in 2004 described the advantages of austempering after a high temperature sintering process.  One disadvantage is the increased cost involved with high temperature sinter cycles.  This paper describes the tensile properties that result from sintering at a conventional sinter temperature (1120°C) and austempering according to the cycle describe in a previous paper.  The properties that are obtained are compared with the properties that result from high temperature sinter and austemper cycle.

 

Authors: Kenneth H. Moyer, Magna-Tech P/M Labs

William R. Jones, CEO, 51ÁÔÆæ, Inc.
William R. Jones, CEO, 51ÁÔÆæ, Inc.

 

 

 

 

 

 

 

Originally Published: 2005

 

Download Austempering at Conventional Sintering Temperatures Paper

The post Austempering at Conventional Sintering Temperatures appeared first on 51ÁÔÆæ.

]]> Vacuum Sintering-A Way to Improve Ductility and Toughness of Structural P/M Parts at the Right Price /tech-downloads/vacuum-sintering-a-way-to-improve-ductility-and-toughness-of-structural-pm-parts-at-the-right-price/ Wed, 17 Jun 2015 16:41:50 +0000 /?post_type=pt_tech_downloads&p=5764 Most parts fabricators do not understand the importance of a quality sinter to provide improved ductility and toughness for tomorrow’s markets. As a result, the potential for growth markets for quality parts has seldom been exploited. Today the main emphasis is still on cost reduction, rather than quality.

The post Vacuum Sintering-A Way to Improve Ductility and Toughness of Structural P/M Parts at the Right Price appeared first on 51ÁÔÆæ.

]]> Most parts fabricators do not understand the importance of a quality sinter to provide improved ductility and toughness for tomorrow’s markets.  As a result, the potential for growth markets for quality parts has seldom been exploited.  Today the main emphasis is still on cost reduction, rather than quality.

 

´¡³Ü³Ù³ó´Ç°ù²õ:ÌýKenneth H. Moyer, Magna-Tech P/M Labs, Ronald D. Payne, Sinteris PM Corporation

William R. Jones, CEO, 51ÁÔÆæ, Inc.
William R. Jones, CEO, 51ÁÔÆæ, Inc.

 

 

 

 

 

 

 

 

Download: Vacuum Sintering-A Way to Improve Ductility and Toughness of Structural P/M Parts at the Right Price

The post Vacuum Sintering-A Way to Improve Ductility and Toughness of Structural P/M Parts at the Right Price appeared first on 51ÁÔÆæ.

]]>